Cisco ONS 15454 Multiservice Transport Platform Advanced Topics and Data over DWDM

Cisco ONS 15454 Multiservice Transport Platform Advanced Topics and Data over DWDM -
Cisco ONS 15454 Multiservice Transport Platform Advanced Topics and Data over DWDM
  • Cisco ONS 15454 Multiservice Transport Platform Advanced Topics and Data over DWDM

    1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
    Loading...

    5 Days Course

    Security

    Upcoming Dates

    Request for a date

    Course Details

    Cisco ONS 15454 Multiservice Transport Platform Advanced Topics and Data over DWDM (MSTP_ATD)

    The Cisco® ONS 15454 Multiservice Transport Platform Advanced Topics and Data over DWDM version 1.0, Release 9.8 is an instructor-led course offered by Learning Services. It is a lab-intensive course that introduces you to the Cisco ONS 15454 Multiservice Transport Platform (MSTP) dense wavelength-division multiplexing (DWDM) advanced features and data. This course covers topics not covered in the Installation to Protection course. You will learn how to design DWDM networks using the Cisco Transport Provisioning (CTP) tool. You will also learn how the 40-channel mesh network is designed, and you will set up a six-node 32/40 channel mesh. In the mesh node network, you will set up associations with time division multiplexing (TDM) nodes and create a six-node, path-switched network using the DWDM network for connections. You will learn the important theoretical concepts that underlie data encapsulation and how they are put to use in the Cisco ONS 15454 MSTP system. Also gain practical knowledge and skills to successfully deploy data over DWDM in your network. In the hands-on labs you will learn to configure: the Cisco Transport Controller, the 10Gb/s data cards, the 1 Gigabit/10 Gigabit Ethernet enhanced crossponder, and T1 over Ethernet. There is also a review of G.709 encapsulation, G.7041 Generic Framing Protocol (GFP), forward error correction and coherent transmission. You will learn how to install and configure the Any-Rate MXP and XP cards. Also, the 100G transponder and muxponder options are explained and configured. Lastly you will explore the ADM10G card, which provisions TDM services directly from the DWDM shelves. The course combines lecture materials and hands-on labs throughout to make sure that you are able to successfully deploy a Cisco ONS 15454 MSTP data over DWDM network.

    Upon completing this course, the learner will be able to meet these overall objectives:

    • Upon completion of this course, you will be able to:
    • Describe the principles of a wavelength, cross-connect-based DWDM mesh network
    • Successfully run the Cisco Transport Provisioning (CTP) tool and design sample DWDM networks
    • Understand and install the provisionable patch cord (PPC) association between the ONS 15454 MSPP TDM ports and the DWDM mux/dmx ports, and install optical channel client connections to create a TDM path-switched network
    • List and describe the major features and benefits of the Cisco ONS 15454 MSTP data cards
    • List and describe the major features and benefits of a Cisco ONS 15454 MSTP system for data over DWDM
    • Configure the 10 Gb data cards with appropriate G.709 options and data circuits
    • Properly configure Ethernet options for Layer 1 transport using the Gigabit Ethernet and 10 Gigabit Ethernet crossponder cards
    • Install Ethernet options for Layer 2 protected and unprotected data ring circuits using the Gigabit Ethernet and 10 Gigabit Ethernet crossponder cards
    • Provision incoming class of service (CoS) marking by port and by customer VLAN and incoming traffic shaping
    • Understand general queuing theory and set up quality of service (QoS) as implemented in the Gigabit Ethernet and 10 Gigabit Ethernet enhanced crossponder cards
    • Install and connect circuits to carry T1 over Ethernet
    • Install and configure the Any Rate Crossponder card for 4×10 unprotected and single 8×20 protected data modes
    • Install and configure 100 Gigabit Ethernet transponder and muxponder cards and circuits
    • Install the ADM-10 Gb protected and unprotected network, configure the cards, and create TDM and data circuits

    Course Outline

    • Module 1: Cisco ONS 15454 Product Fundamentals
    • Module 2: Cisco Transport Planner Design Tool
    • Module 3: Cisco Transport Controller
    • Module 4: Node Turn-Up
    • Module 5: Manual MultiRing and Mesh Network
    • Module 6: PPCs and OCHCC Circuits
    • Module 7: Review of the ONS 15454 MSTP Data Card
    • Module 8: G.709 Encapsulation and 2.5-Gb Transponders Encapsulation
    • Module 9: Generic Framing Protocol G.7041 and 10G Data Multiplexer Enhanced Cards and Encapsulation Options
    • Module 10: Ethernet and VLANs
    • Module 11: 10GE-XP and GE-XP Enhanced Cards, Settings, and Circuits Layer 1
    • Module 12: Enhanced Crossponder Gigabit Ethernet Y-Cable Protection
    • Module 13: Quality of Service (QoS)
    • Module 14: XP-E Cards Protected Ring, CoS Marking by Port, Customer VLAN, and QoS
    • Module 15: T1 over Ethernet in the Crossponder Network
    • Module 16: Any-Rate Muxponder and Crossponder Cards
    • Module 17: 100 Gb Card Installation and Configuration
    • Module 18: ADM-10 Gb Installation for Protected and Unprotected TDM Subnetworks
    • Module 19: ADM-10 Gb Protection
    • Module 20: ADM-10 Gb Circuits
    • Module 21: ONS 15454 MSTP Troubleshooting

    Lab Outline

    • Lab 1: Start the Cisco Transport Provisioning Software and Create a DWDM Network
    • Lab 2: Cisco Transport Controller
    • Lab 3: Establish Six-Node 32/40 Channel Mesh Network
    • Lab 4: PPC and OC48 Path-Switched Network Through DWDM
    • Lab 5: Establish 2.5G Transponder Circuits
    • Lab 6: Data Transport Using 10Gb/s DME Cards
    • Lab 7: Data Transport Using 10 Gigabit Ethernet and GE Enhanced Crossponder Cards
    • Lab 8: Y-Cable Protection for Gigabit Ethernet in the Enhanced Crossponder Cards
    • Lab 9: Gig-E 10Gig-E Enhanced CrossPonder Layer 2 Ring Configuration
    • Lab 10: Circuits to Carry T1 over Ethernet
    • Lab 11: Any Rate Muxponder and Crossponder Options
    • Lab 12: 100 Gigabit Transponders and 10×10 Muxponders
    • Lab 13: ADM-10G Installation and Configuration
    • Lab 14: ADM-10G Protection
    • Lab 15: ADM-10G DS3 Circuits
    • Lab 16: ADM-10G Circuits for Data
    • Lab 17: MSTP Troubleshooting

    This course is designed for technical professionals who need to know how to deploy a Cisco ONS 15454 MSTP data over DWDM network. The primary audience for this course includes:

    • Designers
    • System engineers and implementation staff
    • Network operations center personnel
    • Technical support personnel who are involved with the deployment, operations, and maintenance of the Cisco ONS 15454 MSTP system
    • Channel partners and resellers
    • ONS 15454 MSTP Installation to Protection course