Cisco utbildning

Insoft Services är en av få utbildningsleverantörer inom EMEAR som erbjuder hela utbudet av Cisco-certifiering och specialiserad teknikutbildning.

Läs mer

Cisco-certifieringar

Upplev en blandad inlärningsmetod som kombinerar det bästa av instruktörsledd utbildning och e-lärande i egen takt för att hjälpa dig att förbereda dig för ditt certifieringsprov.

Läs mer

Cisco Learning Credits

Cisco Learning Credits (CLC) är förbetalda utbildningskuponger som löses in direkt med Cisco och som gör det enklare att planera för din framgång när du köper Ciscos produkter och tjänster.

Läs mer

Cisco Fortbildning

Ciscos fortbildningsprogram erbjuder alla aktiva certifikatinnehavare flexibla alternativ för att omcertifiera genom att slutföra en mängd olika kvalificerade utbildningsartiklar.

Läs mer

Cisco Digital Learning

Certifierade medarbetare är VÄRDERADE tillgångar. Utforska Ciscos officiella digitala utbildningsbibliotek för att utbilda dig själv genom inspelade sessioner.

Läs mer

Partner för affärsaktivering

Cisco Business Enablement Partner Program fokuserar på att vässa affärskunskaperna hos Cisco Channel Partners och kunder.

Läs mer

Cisco Kurskatalog

Läs mer

Fortinet-certifieringar

Fortinet Network Security Expert (NSE) -programmet är ett utbildnings- och certifieringsprogram på åtta nivåer för att lära ingenjörer om deras nätverkssäkerhet för Fortinet FW-färdigheter och erfarenheter.

Tekniska utbildningar

Tekniska utbildningar

Insoft är erkänt som Fortinet Authorized Training Center på utvalda platser i EMEA.

Läs mer

Fortinet Kurskatalog

Utforska ett brett utbud av Fortinet-scheman i olika länder samt onlinekurser.

Läs mer

ATC-status

Kolla in vår ATC-status i utvalda länder i Europa.

Läs mer

Fortinet Professionella tjänster

Globalt erkända team av certifierade experter hjälper dig att göra en smidigare övergång med våra fördefinierade konsult-, installations- och migreringspaket för ett brett utbud av Fortinet-produkter.

Läs mer

Microsoft-utbildning

Insoft Services tillhandahåller Microsoft-utbildning i EMEAR. Vi erbjuder Microsofts tekniska utbildnings- och certifieringskurser som leds av instruktörer i världsklass.

Tekniska utbildningar

Extreme-utbildning

Lär dig exceptionella kunskaper och färdigheter i Extreme Networks.

Technische Kurse

Tekniske-certifieringar

Vi tillhandahåller omfattande läroplan för tekniska kompetensfärdigheter på certifieringsprestationen.

Läs mer

Extreme Kurskatalog

Hier finden Sie alle Extreme Networks online und den von Lehrern geleiteten Kalender für den Klassenraum.

Läs mer

ATP-ackreditering

Som auktoriserad utbildningspartner (ATP) säkerställer Insoft Services att du får de högsta tillgängliga utbildningsstandarderna.

Läs mer

Konsultpaket

Vi erbjuder innovativt och avancerat stöd för att designa, implementera och optimera IT-lösningar.Vår kundbas inkluderar några av de största telekombolagen globalt.

Lösningar och tjänster

Globalt erkända team av certifierade experter hjälper dig att göra en smidigare övergång med våra fördefinierade konsult-, installations- och migreringspaket för ett brett utbud av Fortinet-produkter.

Om oss

Insoft Tillhandahåller auktoriserade utbildnings- och konsulttjänster för utvalda IP-leverantörer.Lär dig hur vi revolutionerar branschen.

Läs mer
  • +46 8 502 431 88
  • HPE Primera II: Monitoring and Replication HM9Q6S

    Duration
    2 Dagar
    Delivery
    (Online och på plats)
    Price
    Pris på begäran

    This course provides knowledge of the advanced capabilities of the HPE Primera storage arrays, including lower level data reduction features, reporting, monitoring and alerting, QOS, and local and remote replication options. You gain practical understanding of HPE Primera array capabilities using extensive hands-on lab exercises.

    At the end of this course, the learner should be able to:

    • Describe the objectives and purpose of this course
    • Discuss the topics addressed in this course
    • Describe the benefits of data reduction technologies
    • Perform space reclamation
    • Describe data reduction technologies: deduplication, compression, and data packing
    • Perform a data reduction estimation
    • Perform an online virtual volume conversion
    • Describe System Reporter capabilities
    • Use SSMC and the CLI to run reports
    • Use the CLI stat commands to look at realtime statistics
    • Use HPE Primera app volume sets (AppVVset) in performance context
    • Use the SSMC Workload Insights feature for performance reasons to isolate application spikes and trends
    • Understand the SSMC Workload Insights concept of a performance score
    • Understand the advantages of the Topology Insights feature to pinpoint performance bottlenecks
    • Describe basic HPE Primera UI monitoring
    • View, interpret, and manage system events and alerts
    • Use the checkhealth command for troubleshooting
    • Work with alert notifications for System Reporter
    • Monitor and manage the event log
    • Forward events to syslog server
    • Explain SNMP settings and capabilities
    • Describe the SMI-S standard, WBEM initiative, and HPE Primera CIM support
    • Explain REST API use
    • Describe the advantages of Priority Optimization and Quality of Service (QoS)
    • Discuss the performance implications of Priority Optimization
    • Administer Priority Optimization
    • Monitor the impact of Priority Optimization
    • Create a scheduled and immediate snapshot
    • Export a snapshot
    • Perform a recovery using a snapshot
    • Work with a clone
    • Describe the key features, benefits, and advantages of Remote Copy
    • Explain different types of Remote Copy implementations
    • Explain the differences between synchronous and periodic asynchronous replication modes
    • Discuss different failure scenarios
    • Perform a failover of a Remote Copy group
    • Briefly describe data migration, high availability, and disaster tolerance solutions

    Module 0: Course Introduction

    • Introduction
    • Course agenda

     

    Module 1: Thin Features and Data Reduction

    • Data reduction introduction and overview
    • Zero-detect and thin persistence
    • Space reclamation on Windows, Linux, VMware®
    • Block alignment
    • Thin persistence technology
    • Compaction and overprovisioning
    • Data reduction technologies
    • Deduplication, compression, and data packaging
    • Savings estimation
    • Online virtual volume conversion (dynamic optimization)

     

    Module 2: Monitoring and Reporting

    • System Reporter introduction
    • Data retention
    • SSMC System Reporter options
    • Types of reports
    • Default reports in SSMC
    • Report controls
    • Report templates
    • Creating historical and real time reports
    • Scheduling/emailing reports
    • CLI reporting
    • Performance view
    • Analytics and workload Insights
    • Application volume sets
    • Topology Insights
    • On-node monitoring overview

     

    Module 3: Events and Alerts

    • Alerts and events overview
    • Managing alerts—SSMC/CLI
    • Managing events—SSMC/CLI
    • Alerts and events tiering
    • Alert spare part notification
    • Syslog support
    • The checkhealth command overview and use
    • Troubleshooting
    • System Reporter performance alerts management
    • SNMP overview
    • SNMP use—MIBs, alert traps
    • SNMP management
    • CIM API overview
    • HPE Primera CIM API
    • About SMI-S
    • CIM standard
    • CIM management
    • REST API overview
    • REST API usage

     

    Module 4: Priority Optimization/QoS

    • Introduction and features
    • How does it work
    • Examples
    • Configurable parameters and their meaning
    • Configuring and managing via SSMC
    • Configuring and managing via CLI
    • Monitoring via SSMC and CLI
    • Summary and best practices

     

    Module 5: Snapshots and Clones

    • Snapshot introduction
    • Snapshot use cases
    • How snapshots work
    • Working with a snapshot using SSMC
    • Working with a snapshot using CLI
    • Clone introduction and how it works
    • Working with a clone using SSMC
    • Working with a clone using CLI

     

    Module 6: Remote Replication

    • Remote Copy introduction
    • Supported protocols
    • Architecture, features and terminology
    • Replication modes
    • Supported maximums
    • Failure scenarios and failover
    • Remote Copy operations
    • Data migration options overview
    • Peer persistence overview
    • HPE Cluster Extension overview
    • VMware vSphere® Site Recovery Manager overview

     

    Appendix 1: What’s New in HPE Primera

    • Remote Copy
    • HPE Primera Remote Copy feature set updates with 4.2
    • Peer motion and online import
    • Online import utility (OIU 2.4 ) .
    • VMware vVOLs support with HPE Primera
    • SSMC 3.7 enhancements
    • InfoSight update

     

    Lab outline

     

    Lab 0: vLabs Access and Initial Set up

    • Task 1: Accessing HPE vLabs
    • Task 2: Initial setup
      • Exercise 1: Log in to the HPE StoreServ management console
      • Exercise 2: Configuring hosts
      • Exercise 2a: Adding a host manually using the HBA WWPNs with SSMC
      • Exercise 2b: Adding a host using Host Explorer with SSMC
      • Exercise 3: Install Iometer
      • Exercise 4: Enabling advanced system performance analytics

     

    Lab 1: Online Virtual Volume Conversion and Data Reduction Estimates

    • Exercise 1: Lab set up
    • Exercise 2: Data reduction savings estimate using CLI
      • Estimation analysis results
    • Exercise 3: Online conversion using SSMC

     

    Lab 2: Monitoring and Reporting

    • Exercise 1: Initial lab set up
    • Exercise 2: SSMC default reports
    • Exercise 3: Custom reports using SSMC
      • Physical drives – performance statistic report
      • CPGs – capacity report
      • System capacity report
    • Exercise 4: Realtime information reports
    • Exercise 5: Monitoring app virtual volume sets using dashboard
    • Exercise 6: Using CLI to view real-time performance

     

    Lab 3: Events and Alerts

    • Exercise 1: Viewing alerts (SSMC GUI)
    • Exercise 2: Viewing alerts (CLI)
    • Exercise 3: Viewing tasks (SSMC GUI)
    • Exercise 4: Viewing events (CLI)
    • Exercise 5: Syslog
    • Exercise 6: System Reporter alerts (SSMC GUI)
    • Exercise 7: SNMP traps
    • Exercise 8: Using REST API
      • Part 1—HPE Primera REST preparation and login
      • Part 2—Using the Postman client to create a resource
      • Part 3—Using the Postman client to delete a resource
      • Part 4—Using cURL to manage resources
    • Exercise clean-up

     

    Lab 4: Priority Optimization (QoS)

    • Exercise 1: Initial lab set up
    • Exercise 2: Configuring Priority Optimization using SSMC
    • Exercise 3: Monitoring and managing Priority Optimization using SSMC
    • Exercise 4: Monitoring and managing Priority Optimization using CLI
      • QoS analysis results
      • Additional commands to manage QoS rules

     

    Lab 5: Snapshots and Clones

    • Exercise 1: Initial lab set up
    • Exercise 2: Snapshot file recovery
    • Exercise 3: Snapshot full volume data recovery
    • Exercise 4: Restore data between two snapshots
    • Exercise 5: Schedule snapshots and snapshot expiration policies
      • Create a snapshot policy
      • Create scheduled snapshots using a snapshot policy
      • Exploring scheduled snapshots over time
    • Exercise 6: Create a clone
    • Exercise 7: Create a clone with resynchronization capability
    • Exercise 8: Working with snapshots and clones using CLI

     

    Lab 6: Remote Replication

    • Planning and initial set up of Remote Copy
      • Exercise 1: Lab set up
      • Exercise 2: Verify RCIP ports and configuration set up using SSMC
      • Verifying the RCIP port configuration
      • Remote Copy configuration
      • Exercise 3: Creating and managing Remote Copy groups
      • Exercise 4: Add a volume pair to an existing Remote Copy group
    • Outage Scenarios: Failover to the remote site and failback
      • Exercise 5: Planned failover to the remote site
      • Exercise 6: Recovery of a Remote Copy group after the source system is back online
      • Exercise 7: Restore a Remote Copy group
    • Failover to the remote site for testing or off-site backup
      • Exercise 8: Stop and failover a Remote Copy group
      • Exercise 9: Revert a Remote Copy group and failover again
      • Revert
      • Failover again
      • Exercise 10: Revert the Remote Copy group and replicate in the original direction
      • Exercise 11: Delete a Remote Copy group
      • Exercise 12: Lab clean up
      • Exercise 13: Configuring Remote Copy using CLI

     

    Lab A (Optional): Working with VMware®

    • Exercise 1: Switch between client VMs
    • Exercise 2: Adding the ESXi host and exporting a volume in SSMC
    • Exercise 3: Working with storage using VMware vCenter®

     

    Lab B (Optional) Working with Linux

    • Exercise 1: Switch between client VMs
    • Exercise 2: Adding the RHEL Linux host and export a volume using SSMC
    • Exercise 3: Discovering devices and working with multipathing on the Linux host
    • Exercise 4: Create a partition, add the filesystem, and mount the volume

    Storage administrators who desire additional training on the advanced features of HPE Primera

    One of the following courses:

    • HM9Q5S: HPE Primera I: Management and Connectivity
    • HN5B2S: Introduction to HPE Primera storage (with extended eLearning)
    • HN5A9S: Introduction to HPE Primera storage

    This course provides knowledge of the advanced capabilities of the HPE Primera storage arrays, including lower level data reduction features, reporting, monitoring and alerting, QOS, and local and remote replication options. You gain practical understanding of HPE Primera array capabilities using extensive hands-on lab exercises.

    At the end of this course, the learner should be able to:

    • Describe the objectives and purpose of this course
    • Discuss the topics addressed in this course
    • Describe the benefits of data reduction technologies
    • Perform space reclamation
    • Describe data reduction technologies: deduplication, compression, and data packing
    • Perform a data reduction estimation
    • Perform an online virtual volume conversion
    • Describe System Reporter capabilities
    • Use SSMC and the CLI to run reports
    • Use the CLI stat commands to look at realtime statistics
    • Use HPE Primera app volume sets (AppVVset) in performance context
    • Use the SSMC Workload Insights feature for performance reasons to isolate application spikes and trends
    • Understand the SSMC Workload Insights concept of a performance score
    • Understand the advantages of the Topology Insights feature to pinpoint performance bottlenecks
    • Describe basic HPE Primera UI monitoring
    • View, interpret, and manage system events and alerts
    • Use the checkhealth command for troubleshooting
    • Work with alert notifications for System Reporter
    • Monitor and manage the event log
    • Forward events to syslog server
    • Explain SNMP settings and capabilities
    • Describe the SMI-S standard, WBEM initiative, and HPE Primera CIM support
    • Explain REST API use
    • Describe the advantages of Priority Optimization and Quality of Service (QoS)
    • Discuss the performance implications of Priority Optimization
    • Administer Priority Optimization
    • Monitor the impact of Priority Optimization
    • Create a scheduled and immediate snapshot
    • Export a snapshot
    • Perform a recovery using a snapshot
    • Work with a clone
    • Describe the key features, benefits, and advantages of Remote Copy
    • Explain different types of Remote Copy implementations
    • Explain the differences between synchronous and periodic asynchronous replication modes
    • Discuss different failure scenarios
    • Perform a failover of a Remote Copy group
    • Briefly describe data migration, high availability, and disaster tolerance solutions

    Module 0: Course Introduction

    • Introduction
    • Course agenda

     

    Module 1: Thin Features and Data Reduction

    • Data reduction introduction and overview
    • Zero-detect and thin persistence
    • Space reclamation on Windows, Linux, VMware®
    • Block alignment
    • Thin persistence technology
    • Compaction and overprovisioning
    • Data reduction technologies
    • Deduplication, compression, and data packaging
    • Savings estimation
    • Online virtual volume conversion (dynamic optimization)

     

    Module 2: Monitoring and Reporting

    • System Reporter introduction
    • Data retention
    • SSMC System Reporter options
    • Types of reports
    • Default reports in SSMC
    • Report controls
    • Report templates
    • Creating historical and real time reports
    • Scheduling/emailing reports
    • CLI reporting
    • Performance view
    • Analytics and workload Insights
    • Application volume sets
    • Topology Insights
    • On-node monitoring overview

     

    Module 3: Events and Alerts

    • Alerts and events overview
    • Managing alerts—SSMC/CLI
    • Managing events—SSMC/CLI
    • Alerts and events tiering
    • Alert spare part notification
    • Syslog support
    • The checkhealth command overview and use
    • Troubleshooting
    • System Reporter performance alerts management
    • SNMP overview
    • SNMP use—MIBs, alert traps
    • SNMP management
    • CIM API overview
    • HPE Primera CIM API
    • About SMI-S
    • CIM standard
    • CIM management
    • REST API overview
    • REST API usage

     

    Module 4: Priority Optimization/QoS

    • Introduction and features
    • How does it work
    • Examples
    • Configurable parameters and their meaning
    • Configuring and managing via SSMC
    • Configuring and managing via CLI
    • Monitoring via SSMC and CLI
    • Summary and best practices

     

    Module 5: Snapshots and Clones

    • Snapshot introduction
    • Snapshot use cases
    • How snapshots work
    • Working with a snapshot using SSMC
    • Working with a snapshot using CLI
    • Clone introduction and how it works
    • Working with a clone using SSMC
    • Working with a clone using CLI

     

    Module 6: Remote Replication

    • Remote Copy introduction
    • Supported protocols
    • Architecture, features and terminology
    • Replication modes
    • Supported maximums
    • Failure scenarios and failover
    • Remote Copy operations
    • Data migration options overview
    • Peer persistence overview
    • HPE Cluster Extension overview
    • VMware vSphere® Site Recovery Manager overview

     

    Appendix 1: What’s New in HPE Primera

    • Remote Copy
    • HPE Primera Remote Copy feature set updates with 4.2
    • Peer motion and online import
    • Online import utility (OIU 2.4 ) .
    • VMware vVOLs support with HPE Primera
    • SSMC 3.7 enhancements
    • InfoSight update

     

    Lab outline

     

    Lab 0: vLabs Access and Initial Set up

    • Task 1: Accessing HPE vLabs
    • Task 2: Initial setup
      • Exercise 1: Log in to the HPE StoreServ management console
      • Exercise 2: Configuring hosts
      • Exercise 2a: Adding a host manually using the HBA WWPNs with SSMC
      • Exercise 2b: Adding a host using Host Explorer with SSMC
      • Exercise 3: Install Iometer
      • Exercise 4: Enabling advanced system performance analytics

     

    Lab 1: Online Virtual Volume Conversion and Data Reduction Estimates

    • Exercise 1: Lab set up
    • Exercise 2: Data reduction savings estimate using CLI
      • Estimation analysis results
    • Exercise 3: Online conversion using SSMC

     

    Lab 2: Monitoring and Reporting

    • Exercise 1: Initial lab set up
    • Exercise 2: SSMC default reports
    • Exercise 3: Custom reports using SSMC
      • Physical drives – performance statistic report
      • CPGs – capacity report
      • System capacity report
    • Exercise 4: Realtime information reports
    • Exercise 5: Monitoring app virtual volume sets using dashboard
    • Exercise 6: Using CLI to view real-time performance

     

    Lab 3: Events and Alerts

    • Exercise 1: Viewing alerts (SSMC GUI)
    • Exercise 2: Viewing alerts (CLI)
    • Exercise 3: Viewing tasks (SSMC GUI)
    • Exercise 4: Viewing events (CLI)
    • Exercise 5: Syslog
    • Exercise 6: System Reporter alerts (SSMC GUI)
    • Exercise 7: SNMP traps
    • Exercise 8: Using REST API
      • Part 1—HPE Primera REST preparation and login
      • Part 2—Using the Postman client to create a resource
      • Part 3—Using the Postman client to delete a resource
      • Part 4—Using cURL to manage resources
    • Exercise clean-up

     

    Lab 4: Priority Optimization (QoS)

    • Exercise 1: Initial lab set up
    • Exercise 2: Configuring Priority Optimization using SSMC
    • Exercise 3: Monitoring and managing Priority Optimization using SSMC
    • Exercise 4: Monitoring and managing Priority Optimization using CLI
      • QoS analysis results
      • Additional commands to manage QoS rules

     

    Lab 5: Snapshots and Clones

    • Exercise 1: Initial lab set up
    • Exercise 2: Snapshot file recovery
    • Exercise 3: Snapshot full volume data recovery
    • Exercise 4: Restore data between two snapshots
    • Exercise 5: Schedule snapshots and snapshot expiration policies
      • Create a snapshot policy
      • Create scheduled snapshots using a snapshot policy
      • Exploring scheduled snapshots over time
    • Exercise 6: Create a clone
    • Exercise 7: Create a clone with resynchronization capability
    • Exercise 8: Working with snapshots and clones using CLI

     

    Lab 6: Remote Replication

    • Planning and initial set up of Remote Copy
      • Exercise 1: Lab set up
      • Exercise 2: Verify RCIP ports and configuration set up using SSMC
      • Verifying the RCIP port configuration
      • Remote Copy configuration
      • Exercise 3: Creating and managing Remote Copy groups
      • Exercise 4: Add a volume pair to an existing Remote Copy group
    • Outage Scenarios: Failover to the remote site and failback
      • Exercise 5: Planned failover to the remote site
      • Exercise 6: Recovery of a Remote Copy group after the source system is back online
      • Exercise 7: Restore a Remote Copy group
    • Failover to the remote site for testing or off-site backup
      • Exercise 8: Stop and failover a Remote Copy group
      • Exercise 9: Revert a Remote Copy group and failover again
      • Revert
      • Failover again
      • Exercise 10: Revert the Remote Copy group and replicate in the original direction
      • Exercise 11: Delete a Remote Copy group
      • Exercise 12: Lab clean up
      • Exercise 13: Configuring Remote Copy using CLI

     

    Lab A (Optional): Working with VMware®

    • Exercise 1: Switch between client VMs
    • Exercise 2: Adding the ESXi host and exporting a volume in SSMC
    • Exercise 3: Working with storage using VMware vCenter®

     

    Lab B (Optional) Working with Linux

    • Exercise 1: Switch between client VMs
    • Exercise 2: Adding the RHEL Linux host and export a volume using SSMC
    • Exercise 3: Discovering devices and working with multipathing on the Linux host
    • Exercise 4: Create a partition, add the filesystem, and mount the volume

    Storage administrators who desire additional training on the advanced features of HPE Primera

    One of the following courses:

    • HM9Q5S: HPE Primera I: Management and Connectivity
    • HN5B2S: Introduction to HPE Primera storage (with extended eLearning)
    • HN5A9S: Introduction to HPE Primera storage
      Datum
      Datum på begäran

    Follow Up Courses

    Filtrera
    • 3 Dagar
      Datum på begäran
      Price on Request
      Book Now
    • 3 Dagar
      Datum på begäran
      Price on Request
      Book Now
    • 5 Dagar
      Datum på begäran
      Price on Request
      Book Now
    • 5 Dagar
      Datum på begäran
      Price on Request
      Book Now
    • 3 Dagar
      Datum på begäran
      Price on Request
      Book Now
    • 4 Dagar
      Datum på begäran
      Price on Request
      Book Now
    • 5 Dagar
      Datum på begäran
      Price on Request
      Book Now
    • 5 Dagar
      Datum på begäran
      Price on Request
      Book Now
    • 4 Dagar
      Datum på begäran
      Price on Request
      Book Now
    • 2 Dagar
      Datum på begäran
      Price on Request
      Book Now

    Know someone who´d be interested in this course?
    Let them know...

    Use the hashtag #InsoftLearning to talk about this course and find students like you on social media.